Written scope
Layout, materials, and price after measure
Custom Bathroom Vanities San Angelo TX Built to Fit Your Space
Custom Bathroom Vanities San Angelo TX means a vanity built for your bathroom, not a big-box cabinet that almost fits. We measure your space, talk through storage and style, then build it in our shop with solid hardwood, plywood boxes, and soft-close hardware. Whether you are updating a 1970s ranch in Santa Rita or finishing a new build near Lake View, we handle the build, the finish, and the install.
- Solid hardwood
- Soft-close doors
- Sealed edges
- Written scope firstItemized quote before any cutting
- Template every runReal dimensions, not catalog guesses
- Shop-sprayed finishDoors finished before they arrive
- Doors tuned on siteHinges and glides adjusted before handoff
What Is Included in a Custom Vanity Build
Every vanity we build includes the box, doors, drawers, hardware, finish, and install. Tops and sinks are quoted separately because clients often already have one or want to pick their own. Here is what you get when you hire us for custom bathroom vanity cabinets San Angelo Texas.
- In-Home Measure and SketchWe measure your walls, check the plumbing rough-in, and note the door swing and outlets. You get a sketch with the drawer layout and a written price range. This takes about 45 minutes and there is no charge for the visit.
- Plywood or Hardwood BoxWe build the cabinet box from CARB-compliant plywood or solid hardwood, assembled with glue and clamps. Edges are sealed to keep moisture out. The box is square and scribed to fit your wall, not shimmed with a filler strip.
- Doors, Drawers, and HardwareDoors are solid hardwood or MDF with a catalyzed finish. Drawers run on full-extension, soft-close glides. Hinges are soft-close and adjustable. We drill for standard pulls so you can change hardware later without patching holes.
- Finish and CureWe sand to 180 grit, seal the edges, and spray a catalyzed lacquer or paint in our booth. The finish cures for 48 hours before we handle it. This is what keeps the doors from sticking due to humidity and stops warping wood.
- Install and Plumbing ReconnectWe set the cabinet, shim and scribe it, reconnect the drain and supply lines, and set the top if you have one. Install takes one day for most bathrooms. We haul away the old vanity and leave the floor swept.
Custom Bathroom Vanities for Homes
We build vanities for homeowners and renters who need a cabinet that fits an older bathroom. You pick the door style, finish, and drawer layout, and we handle the build and install.
- Small powder room vanity
- Double-sink family bathroom
- Rental turnover replacement
- Aging vanity refit
Custom Bathroom Vanities for Businesses
We build vanities for property managers and small commercial bathrooms that see daily use. The boxes are plywood with sealed edges, and the finish is sprayed to resist moisture.
- RentalsDurable boxes for tenant turnover
- OfficesSimple vanities for staff restrooms
- RetailSmall restroom vanities that wipe clean
- SalonMoisture-resistant finish for daily use
Custom Bathroom Vanities San Angelo TX: What We Build
Custom Bathroom Vanities San Angelo TX is cabinetry built to the exact dimensions, plumbing layout, and storage needs of your bathroom, then finished and installed on site. We start with a plywood or solid hardwood box, cut and assembled on a table saw and router table, then add doors, drawers, and a finish that holds up to daily moisture. Standard sizes rarely fit older San Angelo homes, so we build to the inch, not to the nearest catalog size.
Most San Angelo bathrooms were framed before 1990, and the walls are rarely square. A stock vanity leaves gaps, wastes corner space, and fights the plumbing. We build around the drain and supply lines, scribe the cabinet to the wall, and seal the edges so humidity does not swell the doors. If you have been searching for custom bathroom vanities in San Angelo TX near me, we can walk your bathroom and give you a real number the same week.
We build the box to your wall, then finish it for Texas humidity.
How Our Vanity Process Works
We keep the process simple: measure, design, build, finish, install. You know what is happening at every step, and you approve the layout before we cut wood.
In-Home Measure
We come to your bathroom, measure the walls, check the plumbing rough-in, and note the door swing and outlet locations. This takes about 45 minutes. You get a sketch and a real price range before we leave, not a vague estimate that changes later.
Design and Layout
We lay out drawers, doors, and shelves around your storage. You pick the door style, wood species, and finish. We confirm the sink type and faucet drill spacing so the top arrives ready to set. Most clients approve the layout within two to three days.
Shop Build
We cut the box on a panel saw, assemble with glue and clamps, and machine the doors on a router table. Build time runs 10 to 14 business days for a standard vanity. You get a photo of the dry-fit before finish goes on.
Finish and Cure
We sand to 180 grit, seal the edges, and spray a catalyzed lacquer or paint in our booth. The finish cures for 48 hours before we handle it. This step is what keeps moisture out of the wood and stops the doors from sticking due to humidity.
Install and Cleanup
We set the cabinet, shim and scribe it to the wall, reconnect the plumbing, and set the top. Install takes one day for most bathrooms. We haul away the old vanity and leave the floor swept. You get a walkthrough before we pack up.
Tools and Methods We Use
Table saw
Used to rip plywood and hardwood panels to width. A sharp blade and a square fence are what keep the box square before assembly.
Router
Cuts the door profiles, hinge mortises, and drawer joints. We use it to match an existing door style when a client wants the vanity to blend with the rest of the house.
Panel saw
Breaks down full sheets of plywood and MDF to rough size before final cuts. This keeps the panels flat and reduces waste on every build.
Sander
Sands doors and boxes to 180 grit before finish. A smooth surface is what makes a catalyzed finish look even and resist moisture.
Clamps
Hold the box square while the glue sets. We check for square before the clamps come off, not after the cabinet is installed.
Nail gun
Pins the back panel and drawer bottoms during assembly. Used with glue, not instead of it, so the cabinet does not loosen over time.
Measurement tools
Tape, square, and laser level used at the in-home measure and again at install. This is how we catch an out-of-square wall before the build starts.
KCMA certification standards
We build boxes and doors to the construction standards set by the Kitchen Cabinet Manufacturers Association. That covers drawer load, hinge cycles, and finish adhesion. It is the difference between a cabinet that lasts and one that loosens in a year.
When to Call for a Custom Vanity
You are remodeling a 1970s bathroom in Santa Rita and nothing at the store fits the 42-inch opening.
We measure the opening, build a vanity to the inch, and scribe the sides to the out-of-square wall. You pick the door style and finish. We handle the plumbing reconnect and haul away the old cabinet. A vanity that looks framed into the wall, with no filler strips and no wasted corner space. Install takes one day.
Your Lake View rental has a peeling laminate vanity that keeps getting worse between tenants.
We build a plywood box with sealed edges and a catalyzed finish. Drawers run on full-extension glides. We use hardware that can take daily use without loosening. A vanity that survives tenant turnover and does not need replacing every few years. One damaged door can be rebuilt to match.
You want a double-sink vanity in College Hills with a lower section for kids and a pull-out for the hair dryer.
We lay out the drawers around your tallest bottles and build a pull-out behind a false front. The sink spacing is set for two faucets. We match the finish to your existing trim. A vanity that stores what you actually own, with no wasted space under the sinks. Build time runs 10 to 14 business days.
Your Downtown San Angelo powder room has a 24-inch vanity that is too small for guests.
We build a 24-inch vanity with a shallow depth to keep the door swing clear. The box is plywood with sealed edges. We set a top and reconnect the plumbing in one visit. A powder room that feels finished, with storage for hand towels and extra soap. No more balancing items on the sink.
How We Build Vanities in San Angelo
San Angelo bathrooms deal with two things: older framing and a wide humidity swing. Most homes in Downtown San Angelo and Santa Rita were built before 1980, so the walls are rarely square and the plumbing is often offset. We measure for that, build the box to fit, and scribe the sides at install. The climate matters too. Spring storms push moisture into the air, and summer AC pulls it back out. That cycle is what makes cheap laminate peel and doors swell. We seal every edge and use a catalyzed finish so the cabinet does not move with the weather. If you are looking for bespoke bathroom vanities San Angelo Texas, this is what that means in practice: a box built for your wall, a finish built for your climate, and an install that reconnects the plumbing before we leave.
- Downtown San AngeloOlder homes with small powder rooms and offset plumbing. We build shallow-depth vanities so the door swing stays clear.
- College HillsMid-century ranches with 48-inch to 60-inch openings. We match door profiles to the existing trim so the vanity looks original.
- Santa RitaTight bathrooms with out-of-square walls. We scribe the cabinet sides instead of using filler strips.
- Lake ViewNewer builds and rentals. We use plywood boxes and sealed edges to handle tenant turnover.
- PaulAnnFamily homes with double-sink layouts. We plan drawer storage around kids and shared use.
- Spring humidity swingsDoors and drawers move as moisture rises and falls. We seal every edge and use adjustable hinges so the fit can be tuned if the season changes it.
From problem to finished result.
42-Inch Opening in Santa Rita
BeforeA 1960s bathroom with a 42-inch opening and a stock vanity that left a 3-inch gap on one side. The doors rubbed the frame, and the laminate had lifted near the sink.
AfterWe built a 42-inch plywood vanity scribed to the wall, with solid hardwood doors and a catalyzed finish. The gap is gone, the doors close with one finger, and the finish wipes clean. Install took one day.
Wipe the finish with a damp cloth and tighten the hinge screws once a year. If a door moves with the seasons, adjust the hinge with a screwdriver instead of replacing it.
Rental Turnover in Lake View
BeforeA rental bathroom with a peeling laminate vanity and sagging shelves. Every turnover meant another repair, and the cabinet floor was soft near the drain.
AfterWe rebuilt the base with sealed plywood, added full-extension drawers, and sprayed a catalyzed finish. Two years of tenants later, no peeling and no sagging. One damaged door was rebuilt to match.
Check the drain connection once a year and wipe up standing water. The sealed edges and finish handle the rest without special products.
Double-Sink Update in College Hills
BeforeA shared bathroom with a 60-inch stock vanity that wasted space under both sinks. No drawers for kids' items, and the hair dryer lived on the counter.
AfterWe built a 60-inch double vanity with a lower drawer bank and a pull-out behind a false front. Sink spacing was set for two faucets. The finish matched the existing trim. Build took 12 business days.
Keep the pull-out glides free of hair and dust. Wipe the finish with a damp cloth. Adjust the soft-close hinges if a door starts to hang.
Problems We Solve With Custom Vanities
Stock cabinets fail in predictable ways in San Angelo bathrooms. We build around those problems instead of covering them with caulk.
Cabinet doors sticking due to humidity
We seal every edge of the door and box, then spray a catalyzed finish that resists moisture. Hinges are adjustable, so if the door moves with the seasons, you can tune it with a screwdriver instead of replacing the cabinet. Doors swell in spring storms and rub the frame. You end up forcing them shut, which wears the hinges and chips the finish. Over time the door will not close at all.
Warping wood and peeling laminate
We build from plywood or solid hardwood, not particleboard. Laminate is glued and trimmed, not ironed on. If you want a painted finish, we use a catalyzed coating that bonds to the wood and will not peel at the edges. Cheap laminate lifts at the edges and traps water underneath. The particleboard core swells and crumbles. A small leak turns into a full vanity replacement.
Misaligned doors and sagging shelves
We assemble the box on a flat table with clamps and check it for square before the glue sets. Shelves are pinned and glued, not just rested on plastic pegs. Doors are hung with adjustable hinges and aligned before we leave. Doors that do not line up make a new bathroom look old. Sagging shelves drop the moment you load them with towels. Both are signs the box was not built square.
Water damage around the sink base
We seal the cabinet floor and line the sink base with a moisture-resistant panel. The plumbing connections are checked before we set the top. If you already have water damage, we can rebuild the base and reuse the doors and drawers. A slow drain leak rots the cabinet floor. By the time you smell it, the box is soft and the vanity has to come out. That is a full tear-out, not a repair.
A vanity built for your wall, your storage, and your climate.
Exact Fit, No Gaps
We build to your wall-to-wall measurement, not the nearest 6-inch increment. That means no filler strips, no wasted corner space, and no caulk lines hiding a bad fit. In older San Angelo homes with out-of-square walls, we scribe the cabinet sides so the reveal stays even from the door frame to the tub.
Storage That Works
We lay out drawers for tall bottles, a pull-out for the hair dryer, and a false front where the plumbing runs. A 36-inch vanity can hold more than a 48-inch stock unit when the interior is planned around what you actually store. We measure your tallest shampoo bottle before we cut a single drawer box.
Finish Built for Humidity
San Angelo swings from dry summers to damp spring storms, and that movement attacks cheap laminate. We use plywood boxes, sealed edges, and a catalyzed finish on solid hardwood doors. The result is a vanity that resists warping wood and peeling laminate for years, not one season.
Repairable and Upgradeable
A custom vanity is built from standard parts you can replace. If a door gets damaged, we build a new one to match. If you want to change the hardware in three years, the holes are already drilled for standard pulls. Stock cabinets often mean replacing the whole unit for one broken part.
What you receive
Clear records you can keep and share.
Build photo
Dry-fit image before finish goes on
Install walkthrough
Door alignment and plumbing check
What to Know Before You Order a Vanity
The box and the finish matter more than the door style. A pretty door on a particleboard box will swell the first damp spring.
Box material
Plywood and solid hardwood hold up to moisture. Particleboard swells and crumbles when water reaches the core. Ask what the box is made of before you compare prices.
Edge sealing
Every cut edge needs sealer or the wood will pull in moisture. Sealed edges are why a custom vanity lasts through spring storms without the doors sticking.
Finish type
A catalyzed finish cures hard and resists water. A thin lacquer looks fine on day one but spots and peels near the sink within a year.
Cabinet work across San Angelo and nearby
Outside these areas? Call and ask about your address. (325) 229-5320
Most single-sink vanities run $1,800 to $3,500 installed, and double-sink builds run $3,200 to $6,500 depending on size, wood, and finish. A basic painted MDF vanity with a simple door sits at the low end. Solid hardwood, furniture-grade finish, and custom drawer layouts push toward the top. We give you a written range after the in-home measure, and that number holds unless you change the design.
We do, in our local shop. We build bespoke vanity cabinets San Angelo from raw plywood and hardwood, not from pre-made boxes. That means we can match an odd wall angle, build around a floor register, or copy a door profile from the rest of your house. If you want a vanity that fits like it was framed into the wall, that is the work we do every week.
The best ones are built from plywood or solid hardwood, sealed on every edge, and finished with a catalyzed coating. They use soft-close hinges and full-extension drawer glides. They are scribed to the wall, not shimmed with a filler strip. We build to those standards on every job, whether it is a simple painted vanity in PaulAnn or a stained hardwood piece in North Angelo.
Yes. We build for any bathroom size, from a 24-inch powder room vanity in Downtown San Angelo to a 72-inch double-sink in Lake View. We handle the measure, build, finish, and install, including reconnecting the plumbing. Most jobs take three to four weeks from the first visit to the final walkthrough. Call (325) 229-5320 to set up a measure.
Get Your Custom Bathroom Vanities San Angelo TX Quote
Call (325) 229-5320 to schedule an in-home measure. We will measure your bathroom, talk through storage and finish, and give you a written price before we leave. Most measures take under an hour.
Call for a Cabinet Measure
Call (325) 229-5320 or send a note and we will set a time to measure your kitchen, bath, closet or office. Shop hours are Monday through Friday, 8:00 to 18:00, and most measures get scheduled within a few days. Bring photos and rough dimensions if you have them, and we will talk through door styles, materials and finish options on site.